• PTC Fuse inside the transformer: to protect the overload of the transformer.
• O/S/C button on the display board: makes the adjustment, maintenance and emergent opening or closing much easier.
• Copper worm gear inside the motor: makes much higher impact-resistance strength to the motor.
• Multiple highlight LED: not only makes the lighting effect even better, but also power-saving.
• Multifunctional external terminal: makes it easier to connect to various external device like: photo beam(optional), wall switch(optional), caution light(optional), and so on.
• Rolling code transmitter: with billions of codes, will be no coincident code or pirated code, makes the controlling much safer.
• Soft start, soft stop: The opener starts and ends the door’s travel cycle gently to reduce wear and extend the life of the opener and door.
• Real-time detection of resistance: the opener makes real-time detection of resistance during operation to ensure precise positioning.
• Auto-close function (require photo beam): the door can automatically close after a pre-programmed number of minute.
• Self locking function: When power off, you can lock the door by hand easily after disengaging the clutch.
• Safety reverse function: The door will reverse to full open when it is overload during closing. The safety reverse force can be adjusted to suit the door and reduce the possibility of damaging property in the event of impact. Can use photo beam(optional) to make safety protection.
• Battery Backup: For convenience and peace of mind, with an optional backup battery you can still use your automatic opener during a power failure or low voltage.
• Low-voltage protection: The process will not perform any action of opening or closing when voltage is too low. The door panel and controller won’t be damaged.
